Digital Clamp Meter Multimeter for Electrician

Clamp Multimeter Specification:

The item type is a Clamp Multimeter, and it is made of ABS material. The environmental conditions for use are as follows:

Safety: The multimeter meets the IEC 61010-1 safety standard, with a Pollution Degree 2 rating. It also complies with the IEC 61010-2-032 and IEC 61010-2-033 standards, with a CAT III 1000V / CAT IV 600V rating.

Working Environment: The operating temperature and humidity range is 0-40°C. The storage temperature and humidity range is -10-60°C (relative humidity 70%), and the battery should be removed during storage.

Temperature Coefficient: The accuracy is 0.1x of the reading per °C (from 28°C).

Maximum Voltage: The maximum voltage between the terminal and ground is AC750V or DC1000V.

Display: The display has a 6000-count reading, and it automatically displays the appropriate unit symbols based on the measured value.

Out of Range Indication: The display will show "OL" when the measured value exceeds the range.

Low Battery Indicator: The display will indicate when the battery voltage is low.

Exceed Normal Working Voltage: The display will show "C" when the normal working voltage is exceeded.

Input Polarity Indication: The display will automatically show "-" for negative polarity.

Maximum Size of Jaw: The maximum size of the jaw is 40mm / 1.6in.

Automatic Power Off: The device will automatically power off after about 15 minutes.

Power Supply: The device requires 1.5V 3 x AAA batteries, which are not included.

Usage:

To use the product, first open the back cover, install the battery, and adjust the range to be measured. The display will show the measured value, and after selecting the appropriate parameters, you can proceed with the measurement.

Technical Specifications:

DC Voltage: 600mV/6V/60V/600V/1000V, Accuracy: ±(0.5%+3) AC Voltage: 600mV/6V/60V/600V/750V, Accuracy: ±(0.8%+3) Alternating Current: 60A/600A/1000A, Accuracy: ±(2.5%+5) Resistance: 600Ω/6kΩ/60kΩ/600kΩ/6MΩ/60MΩ, Accuracy: ±(0.8%+3) Capacitance: 10nF/100nF/1uF/10uF/100uF/1mF/10mF/100mF, Accuracy: ±(3.0%+3) Frequency: 10Hz/100Hz/1kHz/10KHz/100KHz/1MHz/10MHz, Accuracy: ±(0.5%+5) Duty Cycle: 1%-99%, Accuracy: ±(1.0%+2) Temperature: -40°C-1000°C, Accuracy: ±(1.0%+2); -40°F-1832°F, Accuracy: ±(1.0%+2) Maximum Count: 6000 Counts

Package List:

1 x Clamp Multimeter (Battery Not Included) 2 x Test Leads 1 x Temperature Measuring Probe 1 x Bag 1 x Manual

The clamp multimeter is a multi-function device that can measure AC current, AC and DC voltage, resistance, on and off, temperature, capacitance, frequency, and more. It is a 1000A professional clamp meter with non-contact voltage detection, providing high reliability and safety. The device is suitable for use in frequency conversion power supplies, air conditioners, refrigerators, and other refrigeration equipment and motor performance tests. The LCD digital display features auto-ranging, full-range overload protection, data retention, and undervoltage indication. The hand-held clamp meter is widely used in laboratories, field measurements, households, and high-current measurements.

product information: